适配“启动MAA后自动开启模拟器”字段更改

自动构建

.github/workflows/python-app.yml

@@ -0,0 +1,157 @@
+#   <AUTO_MAA:A MAA Multi Account Management and Automation Tool>
+#   Copyright © <2024> <DLmaster361>
+
+#   This file is part of AUTO_MAA.
+
+#   AUTO_MAA is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published
+#   by the Free Software Foundation, either version 3 of the License,
+#   or (at your option) any later version.
+
+#   AUTO_MAA is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty
+#   of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+#   the GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with AUTO_MAA. If not, see <https://www.gnu.org/licenses/>.
+
+#   DLmaster_361@163.com
+
+name: Build AUTO_MAA
+
+on:
+  push:
+    branches: [ "main" ]
+    paths-ignore:
+      - '**.md'
+      - 'LICENSE'
+  pull_request:
+    branches: [ "main" ]
+    paths-ignore:
+      - '**.md'
+      - 'LICENSE'
+
+permissions:
+  contents: read
+
+jobs:
+  pre_check:
+    name: Pre Checks
+    runs-on: ubuntu-latest
+    steps:
+      - name: Repo Check
+        id: repo_check
+        run: |
+          if [[ "$GITHUB_REPOSITORY" != "DLmaster361/AUTO_MAA" ]]; then
+            echo "When forking this repository to make your own builds, you have to adjust this check."
+            exit 1
+          fi
+          exit 0
+  build_AUTO_MAA:
+    runs-on: windows-latest
+    needs: pre_check
+    steps:
+      - name: Checkout code
+        uses: actions/checkout@v4
+      - name: Set up Python 3.12
+        uses: actions/setup-python@v5
+        with:
+          python-version: "3.12"
+      - name: Install dependencies
+        run: |
+          python -m pip install --upgrade pip
+          pip install flake8 pytest
+          pip install -r requirements.txt
+      - name: Lint with flake8
+        run: |
+          # stop the build if there are Python syntax errors or undefined names
+          flake8 . --count --select=E9,F63,F7,F82 --show-source --statistics
+          # exit-zero treats all errors as warnings. The GitHub editor is 127 chars wide
+          flake8 . --count --exit-zero --max-complexity=10 --max-line-length=127 --statistics
+      - name: Built with pyinstaller
+        id: built_with_pyinstaller
+        run: |
+          python package.py
+      - name: Read version
+        id: read_version
+        run: |
+          $MAIN_VERSION=(Get-Content -Path "update_info.txt" -TotalCount 1).Trim()
+          "AUTO_MAA_version=$MAIN_VERSION" | Out-File -FilePath $env:GITHUB_ENV -Append
+          $UPDATER_VERSION=(Get-Content -Path "update_info.txt" -TotalCount 2 | Select-Object -Index 1).Trim()
+          "updater_version=$UPDATER_VERSION" | Out-File -FilePath $env:GITHUB_ENV -Append
+      - name: Create Zip
+        id: create_zip
+        run: |
+          Compress-Archive -Path gui,res,AUTO_MAA.py,Updater.py,package.py,dist/AUTO_MAA.exe,requirements.txt,README.md,LICENSE -DestinationPath AUTO_MAA_${{ env.AUTO_MAA_version }}.zip
+          Compress-Archive -Path gui,dist/Updater.exe -DestinationPath Updater_${{ env.updater_version }}.zip
+      - name: Upload Artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: AUTO_MAA_${{ env.AUTO_MAA_version }}
+          path: |
+            AUTO_MAA_${{ env.AUTO_MAA_version }}.zip
+            Updater_${{ env.updater_version }}.zip
+      - name: Upload Update_Info Artifact
+        uses: actions/upload-artifact@v4
+        with:
+          name: update_info
+          path: update_info.txt
+  publish_release:
+    name: Publish release
+    needs: build_AUTO_MAA
+    runs-on: ubuntu-latest
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v4
+      - name: Download artifacts
+        uses: actions/download-artifact@v4
+        with:
+          pattern: AUTO_MAA_*
+          merge-multiple: true
+          path: artifacts
+      - name: Download Update_Info
+        uses: actions/download-artifact@v4
+        with:
+          name: update_info
+          path: ./
+      - name: Check if release exists
+        id: check_if_release_exists
+        run: |
+          release_id=$(gh release view $(sed 's/\r$//g' <(head -n 1 update_info.txt)) --json id --jq .id || true)
+          if [[ -z $release_id ]]; then
+            echo "release_exists=false" >> $GITHUB_OUTPUT
+          else
+            echo "release_exists=true" >> $GITHUB_OUTPUT
+          fi
+        env:
+          GITHUB_TOKEN: ${{ secrets.WORKFLOW_TOKEN }}
+      - name: Create release
+        id: create_release
+        if: steps.check_if_release_exists.outputs.release_exists == 'false'
+        run: |
+          set -xe
+          shopt -s nullglob
+          NAME="$(sed 's/\r$//g' <(head -n 1 update_info.txt))"
+          TAGNAME="$(sed 's/\r$//g' <(head -n 1 update_info.txt))"
+          NOTES_MAIN="$(sed 's/\r$//g' <(tail -n +3 update_info.txt))"
+          NOTES_TAIL="\`\`\`本release通过GitHub Actions自动构建\`\`\`"
+          NOTES="$NOTES_MAIN<br><br>$NOTES_TAIL"
+          gh release create "$TAGNAME" --target "main" --title "$NAME" --notes "$NOTES" artifacts/*
+        env:
+          GITHUB_TOKEN: ${{ secrets.WORKFLOW_TOKEN }}
+      - name: Update release
+        id: update_release
+        if: steps.check_if_release_exists.outputs.release_exists == 'true'
+        run: |
+          set -xe
+          shopt -s nullglob
+          NAME="$(sed 's/\r$//g' <(head -n 1 update_info.txt))"
+          TAGNAME="$(sed 's/\r$//g' <(head -n 1 update_info.txt))"
+          NOTES_MAIN="$(sed 's/\r$//g' <(tail -n +3 update_info.txt))"
+          NOTES_TAIL="\`\`\`本release通过GitHub Actions自动构建\`\`\`"
+          NOTES="$NOTES_MAIN<br><br>$NOTES_TAIL"
+          gh release delete "$TAGNAME" --yes
+          gh release create "$TAGNAME" --target "main" --title "$NAME" --notes "$NOTES" artifacts/*
+        env:
+          GITHUB_TOKEN: ${{ secrets.WORKFLOW_TOKEN }}

LICENSE

@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<https://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<https://www.gnu.org/licenses/why-not-lgpl.html>.

README.md

@@ -0,0 +1,218 @@
+# AUTO_MAA
+
+MAA多账号管理与自动化软件
+
+!["软件图标"](https://github.com/DLmaster361/AUTO_MAA/blob/main/res/AUTO_MAA.png "软件图标")
+
+---
+
+</h1>
+
+[![GitHub Stars](https://img.shields.io/github/stars/DLmaster361/AUTO_MAA?style=flat-square)](https://github.com/DLmaster361/AUTO_MAA/stargazers)
+[![GitHub Forks](https://img.shields.io/github/forks/DLmaster361/AUTO_MAA?style=flat-square)](https://github.com/DLmaster361/AUTO_MAA/network)
+[![GitHub Issues](https://img.shields.io/github/issues/DLmaster361/AUTO_MAA?style=flat-square)](https://github.com/DLmaster361/AUTO_MAA/issues)
+[![GitHub Contributors](https://img.shields.io/github/contributors/DLmaster361/AUTO_MAA?style=flat-square)](https://github.com/DLmaster361/AUTO_MAA/graphs/contributors)
+[![GitHub License](https://img.shields.io/github/license/DLmaster361/AUTO_MAA?style=flat-square)](https://github.com/DLmaster361/AUTO_MAA/blob/main/LICENSE)
+</div>
+
+## 重要声明
+
+本软件是一个外部工具，旨在优化MAA多账号功能体验，并通过一些方法解决MAA项目未能解决的部分问题，改善代理的稳定性。该软件包可以存储明日方舟多账号数据，并通过修改MAA配置文件、读取MAA日志等行为自动完成多账号代理。本开发团队承诺，不会修改明日方舟游戏本体与相关配置文件。
+
+本项目使用GPL开源，相关细则如下：
+
+- **作者：** AUTO_MAA软件作者为DLmaster、DLmaster361或DLmaster_361，以上均指代同一人。
+- **使用：** AUTO_MAA使用者可以按自己的意愿自由使用本软件。依据GPL，对于由此可能产生的损失，AUTO_MAA项目组不负任何责任。
+- **分发：** AUTO_MAA允许任何人自由分发本软件，包括进行商业活动牟利。但所有分发者必须遵循GPL向接收者提供本软件项目地址、完整的软件源码与GPL协议原文（件），违反者可能会被追究法律责任。
+- **传播：** AUTO_MAA原则上允许传播者自由传播本软件。但由于软件性质，项目组不希望发现任何人在明日方舟官方媒体（包括官方媒体账号与森空岛社区等）或明日方舟游戏相关内容（包括同好群、线下活动与游戏内容讨论等）下提及AUTO_MAA或MAA，希望各位理解。
+- **衍生：** AUTO_MAA允许任何人对软件本体或软件部分代码进行二次开发或利用。但依据GPL，相关成果也必须使用GPL开源。
+- **授权：** 如果希望在使用AUTO_MAA的相关成果后仍保持自己的项目闭源，请在Issues中说明来意。得到项目组认可后，我们可以提供另一份使用不同协议的代码，此协议主要内容如下：被授权者可以自由使用该代码并维持闭源；被授权者必须定期为AUTO_MAA作出贡献。
+- **贡献：** 不论是直接参与软件的维护编写，或是撰写文档、测试、反馈BUG、给出建议、参与讨论，都为AUTO_MAA项目的发展完善做出了不可忽视的贡献。项目组提倡各位贡献者遵照GitHub开源社区惯例，发布Issues参与项目。避免私信或私发邮件（安全性漏洞或敏感问题除外），以帮助更多用户。
+
+以上细则是本项目对GPL的相关补充与强调。未提及的以GPL为准，发生冲突的以本细则为准。如有不清楚的部分，请发Issues询问。若发生纠纷，相关内容也没有在Issues上提及的，项目组拥有最终解释权。
+
+**注意**
+
+- 由于本软件有修改其它目录JSON文件等行为，使用前请将AUTO_MAA添加入Windows Defender信任区以及防病毒软件的信任区或开发者目录，避免被误杀。
+
+---
+
+# 使用方法
+
+## 安装软件
+
+```
+本软件是MAA的外部工具，需要安装MAA后才能使用。
+```
+
+### 下载MAA
+
+- 什么是MAA？    [官网](https://maa.plus/)/[GitHub](https://github.com/CHNZYX/Auto_Simulated_Universe/archive/refs/heads/main.zip)
+
+- MAA下载地址    [GitHub下载](https://github.com/MaaAssistantArknights/MaaAssistantArknights/releases)
+
+### 安装MAA
+
+- 将MAA压缩包解压至任意普通文件夹即可。
+
+- 若为首次安装MAA，请双击`MAA.exe`启动MAA程序以生成MAA配置文件。
+
+### 下载AUTO_MAA [![](https://img.shields.io/github/downloads/DLmaster361/AUTO_MAA/total?color=66ccff)](https://github.com/DLmaster361/AUTO_MAA/releases)
+
+- GitHub下载地址    [GitHub下载](https://github.com/DLmaster361/AUTO_MAA/releases)
+
+### 安装AUTO_MAA
+
+- 将AUTO_MAA压缩包解压至任意普通文件夹即可。
+
+## 配置AUTO_MAA
+
+### 启动AUTO_MAA
+
+- 双击`AUTO_MAA.exe`以启动软件。
+
+```
+注意：
+
+    首次启动时会要求设置管理密钥。
+
+    管理密钥是解密用户密码的唯一凭证，与数据库绑定。
+    密钥丢失或data/key/目录下任一文件损坏都将导致解密无法正常进行。
+
+    本项目采用自主开发的混合加密模式，项目组也无法找回您的管理密钥或修复data/key/目录下的文件。
+    如果不幸的事发生，建议您删除data/key/目录与data/data.db文件后重新录入信息。
+```
+
+### 配置信息
+
+#### 设置MAA
+
+1. 通过`浏览`绑定MAA后，单击`设置MAA`进行MAA全局设置。
+
+2. 在打开的MAA界面完成`性能设置`、`游戏设置`、`连接设置`、`启动设置`、`界面设置`、`软件更新`等基本配置以及代理任务的详细配置。
+
+3. 完成基本配置后，关闭MAA页面，AUTO_MAA会自动保存您的配置。
+
+- 注意：在MAA的设置过程中，若MAA要求`立刻重启应用更改`，请选择`稍后`。否则，MAA重启后的一切更改都不会被程序记录。
+
+- 特别的，您需要确保自己：
+  - 取消勾选`开机自启动MAA`。
+  - 配置自己模拟器所在的位置并根据实际情况填写`等待模拟器启动时间`（建议预留10s以防意外）。
+  - 如果是模拟器多开用户，还需要填写`附加命令`，具体填写值参见多开模拟器对应快捷方式路径（如`-v 1`）。
+
+![MAA配置](https://github.com/DLmaster361/AUTO_MAA/blob/main/res/README/MAA配置.png "MAA配置")
+
+#### 设置AUTO_MAA
+
+本项目已基本完成GUI开发，您可以直接在设置页配置AUTO_MAA相关信息，页面简介如下：
+- `MAA路径`：该项无法直接编辑，仅用于展示当前程序所绑定MAA的路径。
+- `浏览`：选择MAA文件夹。
+- `设置MAA`：编辑MAA全局配置，具体使用方法参见前文。
+- `日常限制`：执行日常代理的日常部分时的超时阈值，当MAA日志无变化时间超过阈值时，视为超时。
+- `剿灭限制`：执行日常代理的剿灭部分时的超时阈值，当MAA日志无变化时间超过阈值时，视为超时。
+- `运行失败重试次数上限`：对于每一用户，若超过该次数限制仍未完成代理，视为代理失败。
+- `开机自动启动AUTO_MAA`：实现AUTO_MAA的自启动。
+- `AUTO_MAA启动时禁止电脑休眠`：仅阻止电脑自动休眠，不会影响屏幕是否熄灭。
+- `检查版本更新`：从GitHub上获取版本更新，要求网络能够访问GitHub。获取版本信息时若遇网络不稳定，主程序有概率未响应，稍等片刻后恢复。
+- `修改管理密钥`：修改管理密钥，当用户列表中无用户时，将跳过验证旧管理密钥。
+
+#### 设置用户配置
+
+本项目已基本完成GUI开发，您可以直接在用户管理页配置用户相关信息，页面简介如下：
+- `新建`、`删除`：新建一个用户到当前用户配置列表、删除当前所选第一行所对应的用户。
+- `转为高级/简洁`：将当前所选第一行所对应的用户转为高级/简洁配置模式。
+- `修改配置`：修改更深层的用户配置信息，当前支持该项的有`简洁用户配置列表的自定义基建栏目`、`高级用户配置列表的日常、剿灭栏目`，详解如下：
+  - `简洁用户配置列表的自定义基建栏目`：获取自定义基建的JSON文件。
+  - `高级用户配置列表的日常、剿灭栏目`：打开MAA进行具体的任务配置，配置方法参见上文。注意，此时你还需要确保所要执行的任务被勾选。
+- `显示密码`：输入管理密钥以显示用户密码，仅当管理密钥正确时能够修改`密码栏目`。
+- `刷新`：清除临时保存的管理密钥。
+- `简洁用户配置列表`：仅支持核心代理选项的设置，其它设置选项沿用MAA的全局设置，部分代理核心功能选项由程序托管。
+- `高级用户配置列表`：支持几乎所有代理选项的设置，通过`修改配置`进行MAA自定义，仅部分代理核心功能选项由程序托管。
+- `用户配置列表栏目`：详解如下：
+  - `用户名`：展示在执行界面的用户名，用于区分不同用户。
+  - `账号ID`：MAA进行账号切换所需的凭据，官服用户请输入手机号码、B服请输入B站ID。
+  - `服务器`：当前支持官服、B服。
+  - `代理天数`：剩余需要进行代理的天数，当剩余天数为0时不再代理或排查。
+  - `状态`：用户的状态，禁用时将不再对其进行代理或排查。
+  - `执行情况`：当日执行情况，不可编辑。
+  - `关卡`、`备选关卡-1`、`备选关卡-2`：关卡号。
+  - `日常`：单独设定是否进行日常代理的日常部分，可进一步配置MAA的具体代理任务，该配置与全局MAA配置相互独立。
+  - `剿灭`：单独设定是否进行日常代理的剿灭部分，高级配置模式下可进一步配置MAA的具体代理任务，该配置与全局MAA配置相互独立。
+  - `自定义基建`：是否启用自定义基建功能，可进一步配置自定义基建文件，该配置与其他用户相互独立。
+  - `密码`：仅用于登记用户的密码，可留空。
+  - `备注`：用于备注用户信息。
+
+- 特别的：
+  - 对于`简洁用户配置列表的关卡、备选关卡-1、备选关卡-2栏目`您可以自定义关卡号替换方案。
+  - 程序会读取`data/gameid.txt`中的数据，依据此进行关卡号的替换，便于常用关卡的使用。
+  - `gameid.txt`会在程序首次运行时生成，其中将预置一些常用资源本的替换方案。
+
+![gameid](https://github.com/DLmaster361/AUTO_MAA/blob/main/res/README/gameid.png "gameid")
+
+## 运行代理任务
+
+### 直接运行
+
+- 在执行页单击`立即执行`直接运行。
+
+### 定时运行
+
+- 在执行页的`定时执行`栏设置时间。
+
+- 保持软件打开，软件会在设定的时间自动运行。
+
+## 人工排查代理结果
+
+### 直接开始人工排查
+
+- 在执行页单击`开始排查`启动排查进程。
+
+- 软件将调起MAA，依次登录各用户的账号。
+
+- 完成PRTS登录后，请人工检查代理情况，可以手动完成未代理的任务。
+
+- 在对话框中单击对应账号的代理情况。
+
+- 结束人工排查后，相应排查情况将被写入用户管理页的`备注栏目`。
+
+---
+
+# 关于
+
+## 未来开发方向
+
+- [x] 支持B服
+- [x] 支持完全自定义MAA配置
+- [x] 支持程序版本更新
+- [ ] 支持对MAA运行状况的进一步识别
+- [ ] 支持宽幅ADB连接适配
+- [ ] 添加更多通知手段
+- [ ] GUI界面美化
+
+## 贡献者
+
+感谢以下贡献者对本项目做出的贡献
+
+<a href="https://github.com/DLmaster361/AUTO_MAA/graphs/contributors">
+
+  <img src="https://contrib.rocks/image?repo=DLmaster361/AUTO_MAA" />
+
+</a>
+
+![Alt](https://repobeats.axiom.co/api/embed/6c2f834141eff1ac297db70d12bd11c6236a58a5.svg "Repobeats analytics image")
+
+## Star History
+
+[![Star History Chart](https://api.star-history.com/svg?repos=DLmaster361/AUTO_MAA&type=Date)](https://star-history.com/#DLmaster361/AUTO_MAA&Date)
+
+## 交流与赞助
+
+欢迎加入AUTO_MAA项目组，欢迎反馈bug
+
+- QQ群：957750551
+
+---
+
+如果喜欢这个项目的话，给作者来杯咖啡吧！
+
+![payid](https://github.com/DLmaster361/AUTO_MAA/blob/main/res/README/payid.png "payid")

Updater.py

@@ -0,0 +1,162 @@
+#   <AUTO_MAA:A MAA Multi Account Management and Automation Tool>
+#   Copyright © <2024> <DLmaster361>
+
+#   This file is part of AUTO_MAA.
+
+#   AUTO_MAA is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published
+#   by the Free Software Foundation, either version 3 of the License,
+#   or (at your option) any later version.
+
+#   AUTO_MAA is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty
+#   of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+#   the GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with AUTO_MAA. If not, see <https://www.gnu.org/licenses/>.
+
+#   DLmaster_361@163.com
+
+"""
+AUTO_MAA
+AUTO_MAA更新器
+v1.0
+作者：DLmaster_361
+"""
+
+import os
+import sys
+import json
+import zipfile
+import requests
+
+from PySide6.QtWidgets import (
+    QApplication,
+    QLabel,
+    QProgressBar,
+)
+from PySide6.QtGui import QIcon
+from PySide6.QtCore import QObject, QThread, Signal
+from PySide6.QtUiTools import QUiLoader
+
+uiLoader = QUiLoader()
+
+
+class UpdateProcess(QThread):
+
+    info = Signal(str)
+    progress = Signal(int, int, int)
+    accomplish = Signal()
+
+    def __init__(self, app_path, name, download_url):
+        super(UpdateProcess, self).__init__()
+
+        self.app_path = app_path
+        self.name = name
+        self.download_url = download_url
+        self.download_path = app_path + "/AUTO_MAA_Update.zip"  #  临时下载文件的路径
+        self.version_path = app_path + "/res/version.json"
+
+    def run(self):
+
+        # 下载
+        try:
+            response = requests.get(self.download_url, stream=True)
+            file_size = response.headers.get("Content-Length")
+            if file_size is None:
+                file_size = 1
+            else:
+                file_size = int(file_size)
+            with open(self.download_path, "wb") as f:
+                downloaded_size = 0
+                for chunk in response.iter_content(chunk_size=8192):
+                    f.write(chunk)
+                    downloaded_size += len(chunk)
+                    self.info.emit(
+                        f"正在下载：{self.name} 已下载: {downloaded_size / 1048576:.2f}/{file_size / 1048576:.2f} MB ({downloaded_size / file_size * 100:.2f}%)"
+                    )
+                    self.progress.emit(0, 100, int(downloaded_size / file_size * 100))
+        except Exception as e:
+            e = str(e)
+            e = "\n".join([e[_ : _ + 75] for _ in range(0, len(e), 75)])
+            self.info.emit(f"下载{self.name}时出错：\n{e}")
+            return None
+        # 解压
+        try:
+            self.info.emit("正在解压更新文件")
+            self.progress.emit(0, 0, 0)
+            with zipfile.ZipFile(self.download_path, "r") as zip_ref:
+                zip_ref.extractall(self.app_path)
+
+            self.info.emit("正在删除临时文件")
+            self.progress.emit(0, 0, 0)
+            os.remove(self.download_path)
+
+            self.info.emit(f"{self.name}更新成功！")
+            self.progress.emit(0, 100, 100)
+
+        except Exception as e:
+            e = str(e)
+            e = "\n".join([e[_ : _ + 75] for _ in range(0, len(e), 75)])
+            self.info.emit(f"解压更新时出错：\n{e}")
+        self.accomplish.emit()
+
+
+class Updater(QObject):
+
+    def __init__(self, app_path, name, download_url):
+        super().__init__()
+
+        self.ui = uiLoader.load(app_path + "/gui/ui/updater.ui")
+        self.ui.setWindowTitle("AUTO_MAA更新器")
+        self.ui.setWindowIcon(QIcon(app_path + "/res/AUTO_MAA.ico"))
+
+        self.info = self.ui.findChild(QLabel, "label")
+        self.info.setText("正在初始化")
+
+        self.progress = self.ui.findChild(QProgressBar, "progressBar")
+        self.progress.setRange(0, 0)
+
+        self.update_process = UpdateProcess(app_path, name, download_url)
+
+        self.update_process.info.connect(self.update_info)
+        self.update_process.progress.connect(self.update_progress)
+
+        self.update_process.start()
+
+    def update_info(self, text):
+        self.info.setText(text)
+
+    def update_progress(self, begin, end, current):
+        self.progress.setRange(begin, end)
+        self.progress.setValue(current)
+
+
+class AUTO_MAA_Updater(QApplication):
+    def __init__(self, app_path, name, download_url):
+        super().__init__()
+
+        self.main = Updater(app_path, name, download_url)
+        self.main.ui.show()
+
+
+if __name__ == "__main__":
+    # 获取软件自身的路径
+    app_path = os.path.dirname(os.path.realpath(sys.argv[0])).replace("\\", "/")
+    # 从本地版本信息文件获取当前版本信息
+    with open(app_path + "/res/version.json", "r", encoding="utf-8") as f:
+        version_current = json.load(f)
+    main_version_current = list(map(int, version_current["main_version"].split(".")))
+    # 从远程服务器获取最新版本信息
+    response = requests.get(
+        "https://ghp.ci/https://github.com/DLmaster361/AUTO_MAA/blob/main/res/version.json"
+    )
+    version_remote = response.json()
+    main_version_remote = list(map(int, version_remote["main_version"].split(".")))
+
+    if main_version_remote > main_version_current:
+        app = AUTO_MAA_Updater(
+            app_path, "AUTO_MAA主程序", version_remote["main_download_url"]
+        )
+        sys.exit(app.exec())

data/gameid.txt

@@ -1,5 +0,0 @@
-龙门币：CE-6
-技能：CA-5
-红票：AP-5
-经验：CA-5
-剿灭模式：Annihilation

gui/ui/updater.ui

@@ -0,0 +1,35 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<ui version="4.0">
+ <class>Dialog</class>
+ <widget class="QDialog" name="Dialog">
+  <property name="geometry">
+   <rect>
+    <x>0</x>
+    <y>0</y>
+    <width>500</width>
+    <height>61</height>
+   </rect>
+  </property>
+  <property name="windowTitle">
+   <string>AUTO_MAA更新器</string>
+  </property>
+  <layout class="QVBoxLayout" name="verticalLayout">
+   <item>
+    <widget class="QLabel" name="label">
+     <property name="text">
+      <string>TextLabel</string>
+     </property>
+    </widget>
+   </item>
+   <item>
+    <widget class="QProgressBar" name="progressBar">
+     <property name="value">
+      <number>24</number>
+     </property>
+    </widget>
+   </item>
+  </layout>
+ </widget>
+ <resources/>
+ <connections/>
+</ui>

manage.py

@@ -1,309 +0,0 @@
-import sqlite3
-import datetime
-import os
-
-#添加用户
-def add():
-    db=sqlite3.connect(DATABASE)
-    cur=db.cursor()
-    adminx=input("用户名：")
-    #用户名重复验证
-    while search(adminx,0)=="":
-        print("该用户已存在，请重新输入")
-        adminx=input("用户名：")
-    numberx=input("手机号码：")
-    dayx=int(input("代理天数："))
-    gamex=input("关卡号：")
-    passwordx=input("密码：")
-    #应用更新
-    cur.execute("INSERT INTO adminx(admin,number,day,status,last,game,password) VALUES('%s','%s',%d,'y','2000-01-01','%s','%s')" %(adminx,numberx,dayx,gamex,passwordx))
-    db.commit()
-    cur.close()
-    db.close()
-    return "操作成功"
-
-#删除用户信息
-def delete(id):
-    db=sqlite3.connect(DATABASE)
-    cur=db.cursor()
-    #检查用户是否存在
-    cur.execute("SELECT * FROM adminx WHERE admin='%s'" %(id))
-    data=cur.fetchall()
-    if len(data)==0:
-        return "未找到"+id
-    #应用更新
-    cur.execute("DELETE FROM adminx WHERE admin='%s'" %(id))
-    db.commit()
-    cur.close()
-    db.close()
-    return "成功删除"+id
-
-#检索用户信息与配置
-def search(id,book):
-    db=sqlite3.connect(DATABASE)
-    cur=db.cursor()
-    #处理启动时间查询
-    if id=="time":
-        cur.execute("SELECT * FROM timeset WHERE True")
-        timex=cur.fetchall()
-        timex=[list(row) for row in timex]
-        cur.close()
-        db.close()
-        if len(timex)==0:
-            return "启动时间未设置"
-        else:
-            for i in range(len(timex)):
-                print(timex[i][0])
-            return ""
-    #处理MAA路径查询
-    if id=="maa":
-        cur.execute("SELECT * FROM pathset WHERE True")
-        pathx=cur.fetchall()
-        if len(pathx)>0:
-            cur.close()
-            db.close()
-            return pathx[0][0]
-        else:
-            cur.close()
-            db.close()
-            return "MAA路径未设置"
-    #处理用户查询与全部信息查询
-    if id=="all":
-        cur.execute("SELECT * FROM adminx WHERE True")
-    else:
-        cur.execute("SELECT * FROM adminx WHERE admin='%s'" %(id))
-    data=cur.fetchall()
-    #处理全部信息查询时的MAA路径与启动时间查询
-    if id=="all":
-        cur.execute("SELECT * FROM pathset WHERE True")
-        pathx=cur.fetchall()
-        if len(pathx)>0:
-            print("\nMAA路径："+pathx[0][0])
-        else:
-            print("\nMAA路径未设置")
-        cur.execute("SELECT * FROM timeset WHERE True")
-        timex=cur.fetchall()
-        timex=[list(row) for row in timex]
-        if len(timex)==0:
-            print("\n启动时间未设置")
-        else:
-            print("启动时间：",end='')
-            for i in range(len(timex)):
-                print(timex[i][0],end='    ')
-            print('')
-    cur.close()
-    db.close()
-    data=[list(row) for row in data]
-    if len(data)>0:
-        #转译执行情况、用户状态，对全部信息查询隐去密码
-        curdate=datetime.date.today()
-        curdate=curdate.strftime('%Y-%m-%d')
-        for i in range(len(data)):
-            if data[i][4]==curdate:
-                data[i][4]="今日已执行"
-            else:
-                data[i][4]="今日未执行"
-            if data[i][3]=='y':
-                data[i][3]="启用"
-            else:
-                data[i][3]="禁用"
-            if id=="all":
-                data[i][6]="******"
-        #制表输出
-        if book==1:
-            print('')
-            print(unit("用户名",15),unit("手机号码",12),unit("代理天数",8),unit("状态",4),unit("执行情况",10),unit("关卡",10),unit("密码",25))
-            for i in range(len(data)):
-                print(unit(data[i][0],15),unit(data[i][1],12),unit(data[i][2],8),unit(data[i][3],4),unit(data[i][4],10),unit(data[i][5],10),unit(data[i][6],25))
-        return ""
-    elif id=="all":
-        return "\n当前没有用户记录"
-    else:
-        return "未找到"+id
-
-#续期
-def renewal(readxx):
-    #提取用户名与续期时间
-    for i in range(len(readxx)):
-        if readxx[i]==' ':
-            id=readxx[:i]
-            dayp=int(readxx[i+1:])
-            break
-    #检查用户是否存在
-    db=sqlite3.connect(DATABASE)
-    cur=db.cursor()
-    cur.execute("SELECT * FROM adminx WHERE admin='%s'" %(id))
-    data=cur.fetchall()
-    if len(data)==0:
-        cur.close()
-        db.close()
-        return "未找到"+id
-    #应用更新
-    cur.execute("UPDATE adminx SET day=%d WHERE admin='%s'" %(data[0][2]+dayp,id))
-    db.commit()
-    cur.close()
-    db.close()
-    return '成功更新'+id+'的代理天数至'+str(data[0][2]+dayp)+'天'
-
-#用户状态配置
-def turn(id,t):
-    #检查用户是否存在
-    db=sqlite3.connect(DATABASE)
-    cur=db.cursor()
-    cur.execute("SELECT * FROM adminx WHERE admin='%s'" %(id))
-    data=cur.fetchall()
-    if len(data)==0:
-        cur.close()
-        db.close()
-        return "未找到"+id
-    #应用更新
-    cur.execute("UPDATE adminx SET status='%s' WHERE admin='%s'" %(t,id))
-    db.commit()
-    cur.close()
-    db.close()
-    if t=='y':
-        return '已启用'+id
-    else:
-        return '已禁用'+id
-
-#修改刷取关卡
-def gameid(readxx):
-    #提取用户名与修改值
-    for i in range(len(readxx)):
-        if readxx[i]==' ':
-            id=readxx[:i]
-            gamep=readxx[i+1:]
-            break
-    #检查用户是否存在
-    db=sqlite3.connect(DATABASE)
-    cur=db.cursor()
-    cur.execute("SELECT * FROM adminx WHERE admin='%s'" %(id))
-    data=cur.fetchall()
-    if len(data)==0:
-        cur.close()
-        db.close()
-        return "未找到"+id
-    #导入与应用特殊关卡规则
-    games={}
-    with open('data/gameid.txt',encoding='utf-8') as f:
-        gameids=f.readlines()
-        for i in range(len(gameids)):
-            for j in range(len(gameids[i])):
-                if gameids[i][j]=='：':
-                    gamein=gameids[i][:j]
-                    gameout=gameids[i][j+1:]
-                    break
-            games[gamein]=gameout.strip()
-    if gamep in games:
-        gamep=games[gamep]
-    #应用更新
-    cur.execute("UPDATE adminx SET game='%s' WHERE admin='%s'" %(gamep,id))
-    db.commit()
-    cur.close()
-    db.close()
-    return '成功更新'+id+'的关卡为'+gamep
-
-#设置MAA路径
-def setpath(pathx):
-    db=sqlite3.connect(DATABASE)
-    cur=db.cursor()
-    cur.execute("SELECT * FROM pathset WHERE True")
-    pathold=cur.fetchall()
-    if len(pathold)>0:
-        cur.execute("UPDATE pathset SET path='%s' WHERE True" %(pathx))
-    else:
-        cur.execute("INSERT INTO pathset(path) VALUES('%s')" %(pathx))
-    db.commit()
-    cur.close()
-    db.close()
-    return "MAA路径已设置为"+pathx
-
-#设置启动时间
-def settime(book,timex):
-    db=sqlite3.connect(DATABASE)
-    cur=db.cursor()
-    #检查待操作对象存在情况
-    cur.execute("SELECT * FROM timeset WHERE True")
-    timeold=cur.fetchall()
-    timeold=[list(row) for row in timeold]
-    timenew=[]
-    timenew.append(timex)
-    #添加时间设置
-    if book=='+':
-        if timenew in timeold:
-            cur.close()
-            db.close()
-            return "已存在"+timex
-        else:
-            cur.execute("INSERT INTO timeset(time) VALUES('%s')" %(timex))
-            db.commit()
-            cur.close()
-            db.close()
-            return "已添加"+timex
-    #删除时间设置
-    elif book=='-':
-        if timenew in timeold:
-            cur.execute("DELETE FROM timeset WHERE time='%s'" %(timex))
-            db.commit()
-            cur.close()
-            db.close()
-            return "已删除"+timex
-        else:
-            cur.close()
-            db.close()
-            return "未找到"+timex
-
-#统一制表单元
-def unit(x,m):
-    #字母与连接符占1位，中文占2位
-    x=str(x)
-    n=0
-    for i in x:
-        if 'a'<=i<='z' or 'A'<=i<='Z' or '0'<=i<='9' or i=='_' or i=='-':
-            n+=1
-    return '    '+x+' '*(m-2*len(x)+n)
-
-#初期检查
-DATABASE="data/data.db"
-if not os.path.exists(DATABASE):
-    db=sqlite3.connect(DATABASE)
-    cur=db.cursor()
-    db.execute("CREATE TABLE adminx(admin text,number text,day int,status text,last date,game text,password text)")
-    db.execute("CREATE TABLE pathset(path text)")
-    db.execute("CREATE TABLE timeset(time text)")
-    readx=input("首次启动，请设置MAA路径：")
-    cur.execute("INSERT INTO pathset(path) VALUES('%s')" %(readx))
-    db.commit()
-    cur.close()
-    db.close()
-
-#初始界面
-print("Good evening!")
-print(search("all",1))
-
-#主程序
-while True:
-    read=input()
-    if len(read)==0:
-        print("无法识别的输入")
-    elif read[0]=='+':
-        print(add())
-    elif read[0]=='-':
-        exit()
-    elif read[0]=='/':
-        print(setpath(read[1:]))
-    elif read[0]==':' and (read[1]=='+' or read[1]=='-'):
-        print(settime(read[1],read[2:]))
-    else:
-        if read[-1]=='?':
-            print(search(read[:-2],1))
-        elif read[-1]=='+':
-            print(renewal(read[:-2]))
-        elif read[-1]=='-':
-            print(delete(read[:-2]))
-        elif read[-1]=='~':
-            print(gameid(read[:-2]))
-        elif read[-1]=='y' or read[-1]=='n':
-            print(turn(read[:-2],read[-1]))
-        else:
-            print("无法识别的输入")

package.py

@@ -0,0 +1,50 @@
+#   <AUTO_MAA:A MAA Multi Account Management and Automation Tool>
+#   Copyright © <2024> <DLmaster361>
+
+#   This file is part of AUTO_MAA.
+
+#   AUTO_MAA is free software: you can redistribute it and/or modify
+#   it under the terms of the GNU General Public License as published
+#   by the Free Software Foundation, either version 3 of the License,
+#   or (at your option) any later version.
+
+#   AUTO_MAA is distributed in the hope that it will be useful,
+#   but WITHOUT ANY WARRANTY; without even the implied warranty
+#   of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+#   the GNU General Public License for more details.
+
+#   You should have received a copy of the GNU General Public License
+#   along with AUTO_MAA. If not, see <https://www.gnu.org/licenses/>.
+
+#   DLmaster_361@163.com
+
+"""
+AUTO_MAA
+AUTO_MAA打包程序
+v4.1
+作者：DLmaster_361
+"""
+
+import os
+import json
+
+os.system(
+    "pyinstaller -F --version-file res/AUTO_MAA_info.txt -w --icon=res/AUTO_MAA.ico AUTO_MAA.py --hidden-import plyer.platforms.win.notification"
+)
+os.system(
+    "pyinstaller -F --version-file res/Updater_info.txt -w --icon=res/AUTO_MAA.ico Updater.py"
+)
+with open("res/version.json", "r", encoding="utf-8") as f:
+    version = json.load(f)
+main_version = list(map(int, version["main_version"].split(".")))
+updater_version = list(map(int, version["updater_version"].split(".")))
+if main_version[3] == 0:
+    main_version = f"v{'.'.join(str(_) for _ in main_version[0:3])}"
+elif main_version[3] == 1:
+    main_version = f"v{'.'.join(str(_) for _ in main_version[0:3])}_beta"
+if updater_version[3] == 0:
+    updater_version = f"v{'.'.join(str(_) for _ in updater_version[0:3])}"
+elif updater_version[3] == 1:
+    updater_version = f"v{'.'.join(str(_) for _ in updater_version[0:3])}_beta"
+with open("update_info.txt", "w", encoding="utf-8") as f:
+    print(f"{main_version}\n{updater_version}\n{version["announcement"]}", file=f)

requirements.txt

@@ -0,0 +1,5 @@
+plyer
+PySide6
+pycryptodome
+pyinstaller
+requests

res/AUTO_MAA_info.txt

@@ -0,0 +1,43 @@
+# UTF-8
+#
+VSVersionInfo(
+  ffi=FixedFileInfo(
+    # filevers and prodvers should be always a tuple with four items: (1, 2, 3, 4)
+    # Set not needed items to zero 0.
+    filevers=(4, 1, 1, 0),
+    prodvers=(0, 0, 0, 0),
+    # Contains a bitmask that specifies the valid bits 'flags'r
+    mask=0x3f,
+    # Contains a bitmask that specifies the Boolean attributes of the file.
+    flags=0x0,
+    # The operating system for which this file was designed.
+    # 0x4 - NT and there is no need to change it.
+    OS=0x4,
+    # The general type of file.
+    # 0x1 - the file is an application.
+    fileType=0x1,
+    # The function of the file.
+    # 0x0 - the function is not defined for this fileType
+    subtype=0x0,
+    # Creation date and time stamp.
+    date=(0, 0)
+    ),
+  kids=[
+    VarFileInfo([VarStruct('Translation', [0, 1200])]), 
+    StringFileInfo(
+      [
+      StringTable(
+        '000004b0',
+        [StringStruct('Comments', 'https://github.com/DLmaster361/AUTO_MAA/'),
+        StringStruct('CompanyName', 'AUTO_MAA Team'),
+        StringStruct('FileDescription', 'AUTO_MAA Component'),
+        StringStruct('FileVersion', '4.1.1.0'),
+        StringStruct('InternalName', 'AUTO_MAA'),
+        StringStruct('LegalCopyright', 'Copyright © 2024 DLmaster361'),
+        StringStruct('OriginalFilename', 'AUTO_MAA.py'),
+        StringStruct('ProductName', 'AUTO_MAA'),
+        StringStruct('ProductVersion', 'v4.1.1.0'),
+        StringStruct('Assembly Version', 'v4.1.1.0')])
+      ])
+  ]
+)

res/Updater_info.txt

@@ -0,0 +1,43 @@
+# UTF-8
+#
+VSVersionInfo(
+  ffi=FixedFileInfo(
+    # filevers and prodvers should be always a tuple with four items: (1, 2, 3, 4)
+    # Set not needed items to zero 0.
+    filevers=(1, 0, 0, 0),
+    prodvers=(0, 0, 0, 0),
+    # Contains a bitmask that specifies the valid bits 'flags'r
+    mask=0x3f,
+    # Contains a bitmask that specifies the Boolean attributes of the file.
+    flags=0x0,
+    # The operating system for which this file was designed.
+    # 0x4 - NT and there is no need to change it.
+    OS=0x4,
+    # The general type of file.
+    # 0x1 - the file is an application.
+    fileType=0x1,
+    # The function of the file.
+    # 0x0 - the function is not defined for this fileType
+    subtype=0x0,
+    # Creation date and time stamp.
+    date=(0, 0)
+    ),
+  kids=[
+    VarFileInfo([VarStruct('Translation', [0, 1200])]), 
+    StringFileInfo(
+      [
+      StringTable(
+        '000004b0',
+        [StringStruct('Comments', 'https://github.com/DLmaster361/AUTO_MAA/'),
+        StringStruct('CompanyName', 'AUTO_MAA Team'),
+        StringStruct('FileDescription', 'AUTO_MAA Component'),
+        StringStruct('FileVersion', '1.0.0.0'),
+        StringStruct('InternalName', 'AUTO_MAA_Updater'),
+        StringStruct('LegalCopyright', 'Copyright © 2024 DLmaster361'),
+        StringStruct('OriginalFilename', 'Updater.py'),
+        StringStruct('ProductName', 'AUTO_MAA_Updater'),
+        StringStruct('ProductVersion', 'v1.0.0.0'),
+        StringStruct('Assembly Version', 'v1.0.0.0')])
+      ])
+  ]
+)

res/set.txt

@@ -0,0 +1,40 @@
+#主界面
+"MainFunction.PostActions": "12"        #完成后
+"TaskQueue.WakeUp.IsChecked": "True"        #开始唤醒
+"TaskQueue.Recruiting.IsChecked": "True"        #自动公招
+"TaskQueue.Base.IsChecked": "True"      #基建换班
+"TaskQueue.Combat.IsChecked": "True"        #刷理智
+"TaskQueue.Mission.IsChecked": "True"       #领取奖励
+"TaskQueue.Mall.IsChecked": "True"       #获取信用及购物
+"TaskQueue.AutoRoguelike.IsChecked": "False"        #自动肉鸽
+"TaskQueue.Reclamation.IsChecked": "False"      #生息演算
+#刷理智
+"MainFunction.Stage1": ""        #主关卡
+"MainFunction.Stage2": ""        #备选关卡1
+"MainFunction.Stage3": ""        #备选关卡2
+"Fight.RemainingSanityStage": "Annihilation"        #剩余理智关卡
+"MainFunction.Series.Quantity": "1"        #连战次数
+"Penguin.IsDrGrandet": "True"        #博朗台模式
+"GUI.CustomStageCode": "False"        #手动输入关卡名
+"GUI.UseAlternateStage": "False"        #使用备选关卡
+"Fight.UseRemainingSanityStage": "True"        #使用剩余理智
+"Fight.UseExpiringMedicine": "False"        #无限吃48小时内过期的理智药
+"GUI.HideUnavailableStage": "False"        #隐藏当日不开放关卡
+"Infrast.CustomInfrastPlanShowInFightSettings": "False"        #显示基建计划
+"Penguin.EnablePenguin": "True"        #上报企鹅物流
+"Yituliu.EnableYituliu": "True"        #上报一图流
+#基建换班
+"Infrast.CustomInfrastEnabled": "True"        #启用自定义基建配置
+"Infrast.DefaultInfrast": "user_defined"        #内置配置
+"Infrast.IsCustomInfrastFileReadOnly": "False"        #自定义基建配置文件只读
+"Infrast.CustomInfrastFile": ""        #自定义基建配置文件地址
+#设置
+"Start.ClientType": "Bilibili"、 "Official"        #服务器
+"Timer.Timer1": "False"        #时间设置1
+"VersionUpdate.ScheduledUpdateCheck": "True"        #定时检查更新
+"VersionUpdate.AutoDownloadUpdatePackage": "True"        #自动下载更新包
+"VersionUpdate.AutoInstallUpdatePackage": "True"        #自动安装更新包
+"Start.RunDirectly": "True"        #启动MAA后直接运行
+"Start.MinimizeDirectly": "True"        #启动MAA后直接最小化
+"Start.OpenEmulatorAfterLaunch": "True"        #启动MAA后自动开启模拟器
+"Start.MinimizingStartup": "True"        #最小化启动模拟器

res/version.json

@@ -0,0 +1,7 @@
+{
+    "main_version": "4.1.1.0",
+    "main_download_url": "https://ghp.ci/https://github.com/DLmaster361/AUTO_MAA/releases/download/v4.1.1/AUTO_MAA_v4.1.1.zip",
+    "updater_version": "1.0.0.0",
+    "updater_download_url": "https://ghp.ci/https://github.com/DLmaster361/AUTO_MAA/releases/download/v4.1.1/Updater_v1.0.0.zip",
+    "announcement": "\n## 修复BUG\n- 适配MAA的`启动MAA后自动开启模拟器`字段更改"
+}

run.py

@@ -1,105 +0,0 @@
-import os
-import subprocess
-import sqlite3
-import datetime
-import time
-import json
-from termcolor import colored
-
-#判断MAA程序运行状态
-def ifoff():
-    while True:
-        time.sleep(10)
-        with open(logpath,'r',encoding='utf-8') as f:
-            logs=f.readlines()[-1:-10:-1]
-            log=''.join(logs)
-            print(colored('\n'.join(logs[::-1]),"green"))
-            if "任务已全部完成！" in log:
-                return True
-            elif ("请检查连接设置或尝试重启模拟器与 ADB 或重启电脑" in log) or ("已停止" in log):
-                return False
-
-#执行MAA任务
-def runmaa(tel,game,num=2):
-    #配置MAA运行参数
-    with open(setpath,"r",encoding="utf-8") as f:
-        data = json.load(f)
-    data["Configurations"]["Default"]["Start.AccountName"]=tel[:3]+"****"+tel[7:]
-    week=str(datetime.datetime.now().strftime('%A'))
-    if week=="Monday":
-        data["Configurations"]["Default"]["MainFunction.Stage1"]="Annihilation"
-    else:
-        data["Configurations"]["Default"]["MainFunction.Stage1"]=game
-    with open(setpath,"w",encoding="utf-8") as f:
-        json.dump(data,f)
-    #开始运行
-    for i in range(num):
-        maa=subprocess.Popen([maapath])
-        maapid=maa.pid
-        time.sleep(60)
-        if ifoff():
-            return True
-        else:
-            os.system('taskkill /F /T /PID '+str(maapid))
-    return False
-
-#更新已完成用户的数据
-def updata(id):
-    db=sqlite3.connect(DATABASE)
-    cur=db.cursor()
-    cur.execute("SELECT * FROM adminx WHERE admin='%s'" %(id))
-    info=cur.fetchall()
-    cur.execute("UPDATE adminx SET day=%d WHERE admin='%s'" %(info[0][2]-1,id))
-    db.commit()
-    cur.execute("UPDATE adminx SET last='%s' WHERE admin='%s'" %(curdate,id))
-    print("upcurdate")
-    db.commit()
-    cur.close()
-    db.close()
-    return 0
-
-#获取PATH与用户数据
-DATABASE="data/data.db"
-db=sqlite3.connect(DATABASE)
-cur=db.cursor()
-cur.execute("SELECT * FROM pathset WHERE True")
-path=cur.fetchall()
-path=str(path[0][0])
-setpath=path+"/config/gui.json"
-logpath=path+"/debug/gui.log"
-maapath=path+"/MAA.exe"
-cur.execute("SELECT * FROM adminx WHERE True")
-data=cur.fetchall()
-data=[list(row) for row in data]
-cur.close()
-db.close()
-#开始执行
-curdate=datetime.date.today()
-curdate=curdate.strftime('%Y-%m-%d')
-idnew=[]
-idold=[]
-idfail=[]
-for i in range(len(data)):
-    if data[i][3]=='y' and data[i][4]!=curdate and data[i][2]>0:
-        book=runmaa(data[i][1],data[i][5])
-        if book:
-            updata(data[i][0])
-            idnew.append(data[i][0])
-            print(colored("已完成"+data[i][0]+"今日的代理","yellow"))
-        else:
-            idfail.append(data[i][0])
-            print(colored("异常中止"+data[i][0]+"的代理","red"))
-for i in range(len(data)):
-    if data[i][3]=='y' and data[i][4]==curdate and data[i][2]>0:
-        book=runmaa(data[i][1],data[i][5])
-        if book:
-            idold.append(data[i][0])
-            print(colored("已重复完成"+data[i][0]+"今日的代理","yellow"))
-with open("log.txt","w", encoding="utf-8") as f:
-    print("任务结束，已完成数："+str(len(idnew))+"，未完成数："+str(len(idfail))+"，重复执行数："+str(len(idold)),file=f)
-    if len(idfail)!=0:
-        print("代理未完成的用户：",file=f)
-    for i in range(len(idfail)):
-        print(idfail[i],file=f)
-with open("OVER","w", encoding="utf-8") as f:
-    print("OVER",file=f)

toexe.py

@@ -1,5 +0,0 @@
-import os
-
-os.system("pyinstaller -F -i res/AUTO_MAA.ico manage.py")
-os.system("pyinstaller -F -i res/AUTO_MAA.ico run.py")
-os.system("pyinstaller -F -i res/AUTO_MAA.ico AUTO_MAA.py")